Areas we cover · High Wycombe
Roofers in High Wycombe
High Wycombe grew on furniture making and its roofs still show it: Victorian terraces and old chair works under slate, with 20th-century estates spreading up the sides of the Wye valley. We repair, reroof and lead them all.
- About 13 miles from Aylesbury
- Postcodes HP11, HP12, HP13
Quick answer
Do you cover High Wycombe?
Yes. High Wycombe is about thirteen miles from Aylesbury and we cover the whole town across HP11, HP12 and HP13, from the furniture heritage streets in the centre to the estates on the valley sides. Leadwork is bossed, welded and dressed in house by our own team.
- County
- Buckinghamshire
- Planning authority
- Buckinghamshire Council
- Postcodes
- HP11, HP12, HP13
- From Aylesbury
- About 13 miles
A furniture town under slate and tile
High Wycombe made its name making chairs, the Windsor chair above all. Through the 19th century the town filled with furniture works and the terraced streets built for the people who worked in them and many of those buildings are still roofed in slate, with lead valleys, lead lined gutters and shared chimney stacks that are now well over a hundred years old.
That heritage is protected in more than one place. As well as the town centre conservation area, High Wycombe has the Leigh Street Furniture Heritage Conservation Area, which protects former furniture works. Away from the centre, the estates built across the valley sides through the 20th century are mostly concrete tile, with flat roofed garages, porches and extensions.
What that means for your roof: a slate roof of that age usually fails at its fixings long before the slates themselves wear out. Nails rust through, slates slide out of line and the battens underneath can soften where water has been getting in for a while. On a terrace the shared chimney stack and the lead valley between neighbouring roofs are worth looking at in the same visit, because a repair on one house often depends on the state of the one next door.
What High Wycombe roofs usually need
- Slipped and cracked slates on Victorian terraces where the original nails have corroded.
- Failed lead valleys and gutters on terraces and old works buildings, often patched more than once.
- Chimney leadwork on shared stacks, where old flashings have been covered in sealant.
- Tired felt flat roofs on garages, porches and extensions.
- Loose ridge tiles and verges on hillside estates that take the full force of the wind.
Conservation areas and consent in High Wycombe
Buckinghamshire Council handles planning and listed building consent in High Wycombe and consulted on an updated appraisal of the High Wycombe conservation area in 2026. Putting back slate, tile or lead to match what's there is normally a repair that needs no consent. Swapping natural slate for something else on a listed building is different: that needs listed building consent. In either conservation area a visible change to the roof may also need planning permission. We'll tell you which applies before anything is ordered.
Leadwork in High Wycombe
Lead lined gutters on the old furniture works
The furniture works that made High Wycombe's name were long buildings with big roofs and gutters to match, many with lead lined valleys and box gutters running between slopes or behind parapets. Since 2012 the Leigh Street Furniture Heritage Conservation Area has protected a group of these former works.
Big gutters carry a lot of water. When a lead gutter splits or an outlet blocks, water can pour into the building below, so they're worth checking every year or two. We clear and inspect them, photograph the lead and renew failed sections with proper drips and outlets.
On the terraced streets the leadwork is on a smaller scale: valleys between slopes, back gutters behind shared chimney stacks and the step flashings where one house steps up from the next on a sloping street. We do all of it in house.
Google reviews
What our customers say
Damien's work on the entire job, from start to finish, was absolutely excellent. The communication was excellent, the team was great, they arrived exactly on time and completed some quality work. I will definitely be recommending Mionlach to anyone needing roofing work.
10/10 for my stunning new slate roof. Would highly recommend Damien and his team (Martin) they were professional, knowledgable and delivered a high standard of work. From the initial quote to the finished job communication was fantastic, when the job was completed they were back to finish any snagging and were very respectful of our property. If you’re considering getting a new roof you must speak to Damien first!
Straight answers
Roofing in High Wycombe: common questions
Anything else, call Damien on 07803 473995 or send us a photo on WhatsApp.
Do you work on former furniture factory buildings?
Yes. Old works buildings often have large slate roofs with lead valleys and box gutters. We inspect, clear and repair them and renew failed lead with proper drips and outlets.
Do you repair slate roofs on Victorian terraces?
Yes. On High Wycombe's terraces the usual faults are corroded slate nails, split lead valleys and back gutters behind shared stacks. We refix or replace slates and renew the lead. If the roof is past saving, we'll show you photos and quote for a reroof.
Do I need permission for roof work in a High Wycombe conservation area?
Not usually for like-for-like repairs. Buckinghamshire Council decides consent in the town centre and Leigh Street conservation areas and a change of material on a listed building needs listed building consent.
Which parts of High Wycombe do you cover?
All of it, across HP11, HP12 and HP13, plus Hazlemere, Downley and Hughenden Valley.
Nearby
Nearby areas
We also cover the villages around the town, including Hazlemere, Downley and Hughenden Valley.